问题描述
GCC 4.x 不接受 C++14 代码的 --std=c++14 开关 - 它需要 --std=c++1y 代替.更高版本采用 --std=c++1z 但(可能)不是 --std=c++17 尚未设置(在 2016 年编写).也许 C++11 也有类似的问题.
GCC 4.x doesn't accept the --std=c++14 switch for C++14 code - it takes --std=c++1y instead. Later versions take --std=c++1z but (probably) not --std=c++17 which has not been set yet (writing this in 2016). Perhaps there are similar issues with C++11.
CMake 是否有一些工具(也许作为一个模块)来根据 GCC 版本传递正确的开关?
Does CMake have some facility (perhaps as a module) to pass the correct switch according to the GCC version?
推荐答案
当想要指定特定的 C++ 版本时，推荐使用 CMake 3.1 及更高版本执行此操作的方法是使用 CXX_STANDARD，CXX_STANDARD_REQUIRED 和 CXX_EXTENSIONS 目标属性，或它们的变量等效项以指定目标默认值.可以在此处找到完整的详细信息，但简短的版本是像这样:
When wanting to specify a particular C++ version, the recommended way to do this with CMake 3.1 and later is to use the CXX_STANDARD, CXX_STANDARD_REQUIRED and CXX_EXTENSIONS target properties, or their variable equivalents to specify target defaults. Full details can be found here, but the short version goes something like this:
cmake_minimum_required(VERSION 3.1)
project(Example)
set(CMAKE_CXX_STANDARD 14)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
set(CMAKE_CXX_EXTENSIONS OFF)
# ... Define targets, etc. as usual
然后，CMake 应根据编译器支持的内容为请求的 C++ 标准选择适当的编译器标志，如果不支持请求的标准，则出错.
CMake should then select the appropriate compiler flag for the requested C++ standard based on what the compiler supports, or error out if it doesn't support the requested standard.
还应注意，CMake 可能会升级目标以使用比其 CXX_STANDARD 目标属性指定的语言标准更高的语言标准.编译功能需求的使用(如@FlorianWolters 的回答中所述)可以提高语言标准要求.事实上，CMake 将始终选择由 CXX_STANDARD 目标属性或在目标上设置的编译功能要求指定的更强的语言要求.另请注意，3.10.1 的 CMake 文档并未准确反映 CXX_EXTENSIONS 与编译功能交互的方式，因为 CXX_EXTENSIONS 仅在 CXX_STANDARD 也为大多数常见的编译器指定(因为它们与一个编译器标志一起指定).
It should also be noted that CMake may upgrade the target to use a later language standard than the one specified by its CXX_STANDARD target property. The use of compile feature requirements (as mentioned in @FlorianWolters answer) can raise the language standard requirement. In fact, CMake will always pick the stronger language requirement specified by either the CXX_STANDARD target property or the compile feature requirements set on the target. Note also that the CMake documentation as of 3.10.1 does not accurately reflect the way CXX_EXTENSIONS interacts with compile features, as CXX_EXTENSIONS only takes effect if CXX_STANDARD is also specified for most common compilers (since they are specified together with the one compiler flag).
这篇关于如何让 CMake 基于 GCC 版本通过 std=c++14/c++1y 或 c++17/c++1z?的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持跟版网！